© Ortega Global Solutions 2019
Last updated: 8/28/19
Open to AWD vehicles running 8.99 and quicker. We encourage cars running 9.00 and slower to run one of our Index classes.
All competitors must meet NHRA General Safety Rules for the speed and ET the car will run. (Note: All Street Wars are at NHRA tracks)
All OGS1320 events are hosted at NHRA sanctioned tracks, therefore all NHRA safety rules and Guidelines must be followed at all times. It is the sole responsibility of each competitor to ensure that their vehicle is in absolute compliance of any and all 2017 NHRA rules. OGS1320 class rules are solely for the purpose of insuring side by side competition and in no way shape or form supersede or conflict with NHRA safety rules and Guidelines. All NHRA safety rules and Guidelines must be followed at all times during the course of each event.
OGS1320 reserves the right at any time to inspect, seal for inspection, and/or tear down a participant’s vehicle. Every vehicle is subject to such further technical inspection at any time before, during or after an event, at the time and in the place and manner directed by an OGS1320 tech official. Not complying in full with any inspection request will result in disqualification for further competition and such other penalties as deemed appropriate by OGS1320 management.
OGS1320 PRESS RELEASES
Press Releases are sent via email. If you are an AWD racer, please inform [email protected] so we can add you to our email list. Send your full name, email address, and class you race.
Engine must be an import or a domestic sport compact overhead-cam, production-based design. Aftermarket blocks permitted. Engine swaps of same or different manufacturer of body permitted. Dry sump oil system or external oil pumps permitted.
ENGINE CONTAINMENT DEVICE:
Engine diaper or catch-pan device to capture oil and debris in event of engine failure is mandatory. Where exhaust header passes directly under oil pan, two-piece diaper may be utilized. If catch-pan device is used, catch pan must employ minimum 2-inch-high lips on all sides. Lips must be coved or curved inward, so as to contain oil in pan. Catch pan must cover entire area below engine/transmission. Catch pan must extend from radiator support to firewall and from framerail to framerail. In all cases, lips must be adequate enough to contain oil in the catch pan. Should a competitor spill excessive oil from the catch pan and debris onto the track, he or she may be disqualified from further competition at the sole and absolute discretion of the event director until catch pan is upgraded, regardless of height of pan lips or pan design.
Any fuel permitted.
Fuel cells permitted. Mechanical fuel pumps permitted.
Single turbo configurations only.
Air-to-Air or Liquid-to-Air intercoolers permitted.
FLYWHEEL SHIELD, MANUAL TRANSMISSION:
All cars using a clutch and running quicker than 11.49 or faster than 135 mph must be equipped with a flywheel shield made of 1/4-inch-minimum-thickness steel plate. Shield must surround the bellhousing completely except for area of flywheel shield adjacent to differential and axle shaft. Shield may be multi-piece with pieces bolted together using minimum 3/8-inch-diameter Grade 5 or M10 class 8.8 bolts; may be attached to engine and/or bellhousing. In lieu of shield, a blanket meeting SFI Spec 4.1, completely surrounding the bellhousing, is permitted.
Automatic transmissions are permitted. Trans-brakes are permitted. All cars using an automatic transmission and running quicker than 10.99 or faster than 135 mph must be equipped with a transmission shield meeting SFI Spec 4.1, a flexplate shield labeled as meeting SFI Spec 30.1, and a flexplate labeled as meeting SFI Spec 29.1.
Aftermarket driveline components permitted.
Maximum slick or DOT tire size 28.0” X 11.5”. Retreads, space-saver spares, or any other non-DOT-approved tires are prohibited.
Four-wheel hydraulic brakes are mandatory. Staging brakes permitted. Power brake delete kits are permitted.
Stock front and rear suspension is required. The use of vehicles stock front and rear suspension mounting is also required. Aftermarket/lightweight front control arms, rear control arms and sub-frames/K-members are permitted. Modified OEM rear control arms permitted.
OEM/Stock chassis, with complete OEM floor pan, frame rails and firewall mandatory.
Permitted. May not extend more than 45″ passed the centerline of the front wheel.
Minimum 3 inches from front of car to 12 inches behind centerline of front axle, 2 inches for remainder of car (except for exhaust more than 12 inches behind centerline of front axle).
Mandatory on any vehicle running 150 mph or faster.
Any year vehicle is permitted, but must be an import/sport compact body. Lightweight body panels limited to hood, fenders, and deck lid. Carbon fiber roofs are allowed. Lightweight OEM replica/style doors permitted. Doors must open and close from inside and outside. Mild customizing and body kits permitted, but must retain full-bodied appearance; with minimum two functional doors One-piece front ends are prohibited. Chopped roofs are prohibited.
Complete headlight and taillight assemblies (all) mandatory. One headlight may be removed for intake ducting.
WINDSHIELD AND WINDOWS:
Factory appearing polycarbonate/lexan windows are permitted. Window deletes are not permitted.
Batteries must be securely mounted; may not be located in driver compartment unless sealed off per General Regulations.
Two steps, rev limiters, etc. permitted.
Mandatory on any car running 9.99 or quicker, or 135 mph or faster, or on any car where battery is relocated to trunk area of vehicle.
FIRE EXTINGUISHER SYSTEM:
Permitted; must be securely mounted.
All competitors must have competition number and membership number. A valid NHRA competition license mandatory for driver of any vehicle running 9.99 or quicker. All drivers must have a valid state or government-issued driver’s license beyond a learner’s-permit level.
DRIVER RESTRAINT SYSTEM:
Three-inch-wide driver restraint system labeled as meeting SFI Spec 16.1 mandatory in any car required to have a roll bar or roll cage. System includes crotch strap and must be updated at two year intervals from date of manufacturer.
NECK COLLAR/HEAD AND NECK RESTRAINT SYSTEM/DEVICE:
Mandatory on driver of any car running 9.99 seconds or quicker or 135 mph or faster. An SFI 3.3 head sock or SFI 3.3 skirted helmet is required where a neck collar is required but has been substituted with a head and neck restraint system/device. A neck collar may be substituted for a head sock when using a head and neck restraint system/device.
9.99 to 7.50 or any car exceeding 135 mph:
Jacket and pants meeting SFI Spec 3.2A/5 and gloves meeting SFI Spec 3.3/1 mandatory.
Ethanol fuel safety requirement as follows: Suit meeting SFI Specs 3.2A/15, gloves and boots meeting SFI Spec 3.3/5 mandatory.
PLEASE DIRECT ALL TECH RELATED QUESTIONS OR ISSUES TO [email protected]
Final call and rule interpretation will always be decided by tech officials. All racers who participate at OGS1320 events are agreeing to obey tech official decisions.
© Ortega Global Solutions 2019